Ajax FireProtect Plus Wireless Carbon Monoxide, Smoke & Heat - Black

The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm. It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously. Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.


  • Radio channel smoke detector with temperature sensor and built-in siren
  • Wireless
  • Indoors
  • Operates independently or with Hub, Hub Plus, Hub 2, Rex, uartbridge and ocBridge Plus
  • Photoelectric and temperature sensors with CO detector
  • +59°С ±2°С
  • Sound/light
  • 85 dB Volume of siren
  • Alarm signal delivery time 0.15 s
  • Battery: Two CR2 batteries
  • Power supply voltage: 3 V
  • Battery life — up to 4 years Backup battery: CR2032
  • Jeweller radion technology; Communication range with central unit — up to 1,300 m in an open space
  • Two-way communication between devices
  • Operating frequencies — 868.0-868.6 MHz
  • Self-adjusting RF output power — up to 20 mW
  • Block encryption based on AES algorithm
  • Detector polling period — 12−300 s
  • Permmisable humidy Up to 80%
  • Protection against fraud
  • Jamming detection
  • Tamper-resistant
  • 132х132×31 mm